D-Link DFL-1600 User Manual page 245

22.1. IPsec
3. Configure Route
Next step is to configure the route to the IPsec tunnel.
Routing Main Routing Table
Enter the following:
Interface: IPsecTunnel
Network: On the head office firewall 10.0.2.0/24 and on the branch office
firewall 10.0.1.0/24.
Then click OK
4. Configure Rules
Finally we need to configure the rules to allow traffic inside the tun-
nel. See 14.3 IP Rules Configuration
Example:
Figure 22.2: IPsec Roaming Client Example Scenario.
This example describes how to configure a IPsec tunnel, used for roaming
clients (mobile users) that connect to the head office to gain remote access.
The head office network use the 10.0.1.0/24 network span with external
firewall IP ip wan.
Configuring a IPsec Tunnel for Roaming Clients
D-Link Firewalls User's Guide
Add Route:
for details on how to configure rules.
225