22.1. IPsec
223
22.1.5
: IPsec Configuration
Example:
Configuring a LAN-to-LAN IPsec Tunnel
Figure 22.1: LAN-to-LAN Example Scenario.
This example describes how to configure a LAN-to-LAN IPsec tunnel, used
to connect a branch office to the head office network.
The head office network use the 10.0.1.0/24 network span with external
firewall IP ip head wan. The branch office use the 10.0.2.0/24 network span
with external firewall IP ip branch wan.
The following configuration will have to be done on both the head office
firewall and the branch office firewall.
D-Link Firewalls User's Guide