D-Link DFL-1600 User Manual page 290

270
2. Create SAT SLB Rule
Next step is to set up the SAT SLB rule.
Rules IP Rules
Name: SSH SLB
Action: SLB SAT
Service: ssh
Source Interface: any
Source Network: all-nets
Destination Interface: core
Destination Network: ip ext
SAT Server Load Balancing
Server Addresses: Select SSH Server1 and SSH Server2.
Then click OK
3. Create NAT Rule
Next step is to set up the NAT rule to permit traffic SAT:ed by the
above rule.
Rules IP Rules
Name: SSH SLB NAT
Action: NAT
Service: ssh
Source Interface: any
Source Network: all-nets
Destination Interface: core
Destination Network: ip ext
Then click OK
It is possible to configure settings for monitoring, distribution method
and stickiness. But in this example the default values are used.
Chapter 24. Server Load Balancing (SLB)
Add IP Rule:
Add IP Rule:
Note
D-Link Firewalls User's Guide