D-Link DFL-1600 User Manual page 256

236 Chapter 22. VPN Protocols & Tunnels
WebUI
:
1. Pre-Shared Key
First of all we need to create a pre-shared key to use for the IPsec
authentication.
Objects VPN Objects Pre-Shared Keys Add
Pre-Shared Key:
Enter the following:
Name: Enter a name for the pre-shared key, L2TPKey for instance.
Passphrase/Shared Secret: Enter a secret passphrase.
Passphrase/Confirm Secret: Enter the secret passphrase again.
Then click OK
2. Local User Database
We need to create a local user database to store user information in.
For more information, see 17.2.1Local User Database section.
User Authentication Local User Databases Add Local
User Database:
Enter a name for the user database, "UserDB" will be used in this example:
Name: UserDB
Then click OK
3. Add User to Local User Database
We need to add a user to the local user database we created above.
User Authentication Local User Databases UserDB
Add User:
Enter the following:
Username: testuser
Password: testpassword
Confirm Password: testpassword
It is possible to configure a static IP for this user in the Per-user PPTP/L2TP
IP Configuration section. Then click OK
D-Link Firewalls User's Guide