27.3. Scenarios: Enabling Transparent Mode
All traffic passing through the firewall will have to pass through the IP rule
set. To allow HTTP traffic, a new IP rule has to be configured. (Refer
to
14.3
Scenario.)
WebUI
:
1. Interfaces
Interfaces
Enter the following:
IP Address: 10.0.0.2
Network: 10.0.0.0/24
Default Gateway: 10.0.0.1
Transparent Mode: Enable
Then click OK
Interfaces
Enter the following:
IP Address: 10.0.0.2
Network: 10.0.0.0/24
Transparent Mode: Enable
Then click OK
2. Rules
Rules
IP Rules
Enter the following:
Name: HTTPAllow
Action: Allow
Service: http
Source Interface: LAN
Destination Interface: any
Source Network: 10.0.0.0/24
Destination Network: 0.0.0.0/0 (all-nets)
Then click OK
Ethernet
Edit (WAN):
Ethernet
Edit (LAN):
Add
D-Link Firewalls User's Guide
IP Rule:
287