D-Link DFL-1600 User Manual page 275

23.4. Scenarios: Setting up Traffic Shaping
WebUI
:
1. Pipes
Pipe "std-in" for inbound traffic:
Enter the following and then click OK.
Traffic Shaping
General
Name: std-in
Pipe Limits
Total: 1000
Pipe "std-out" for outbound traffic:
Create the other pipe using the same steps as above with the name
changed to "std-out"
2. Pipe Rules
Rule "ToInternet" assigning pipes to traffics going through the fire-
wall from LAN to WAN for all services(defined by the Services object
"all-services"):
Traffic Shaping
General
Enter the following:
Name: ToInternet
Service: all-services
Address Filter
Source
Interface: lan
Network: lannet
Pipes Add
Pipe Rules
Destination
wan
all-nets
D-Link Firewalls User's Guide
Pipe:
Add Pipe Rule:
255