D-Link DFL-1600 User Manual page 145

15.2. Access Rule
the rule is triggered, and the specified action will be carried out by the
firewall.
Filtering Fields
Interface:
The interface that the packet arrives on.
Network:
The IP span that the sender address should belong to.
Action
Drop:
to discard the packets that match the defined fields.
Accept:
to accept the packets that match the defined fields for further
inspection in the Rule set.
Expect:
If the sender address of the packet matches the Network specified by
this rule, the receiving interface is compared to the specified interface.
If the interface matches, the packet is accepted in the same manner as
by the Accept action. If the interfaces do not match, the packet is
dropped in the same manner as by the Drop action.
Logging can be enabled on demand for these Actions.
(Refer to 5 Logging)
D-Link Firewalls User's Guide
125