D-Link DFL-1600 User Manual page 75

9.1. Ethernet
Example:
The interface connected to LAN (or one of the LANs) is configured with
"lan ip", "lannet", and the default gateway address "lan gate".
WebUI
:
1. Specifying the IP4 Host – "lan ip" and "lan gate", and an IP4 Net-
work – "lannet" in the Objects.
(See examples in
2. Interfaces
Click the item for LAN interface
General:
Name: Define or change the name of the interface in the edit box
IP Address: Select "lan ip" from the dropdown list.
Network: Select "lannet" from the dropdown list.
Default Gateway: Select "lan gate" from the dropdown list.
and then click OK.
3. Optional settings:
General:
Enable DHCP Client check box
Enable Transparent Mode check box
Hardware Settings:
(The network adapter's hardware settings can be adjusted here.)
Media – Specifies if the link speed should be auto-negotiated or
locked to a static speed.
Duplex – Specifies if duplex should be auto-negotiated or locked to
full or half duplex.
Advanced:
Automatic Route Creation check boxes
Route Metric edit box
(By checking these options and specifying the metric value, the
interface configured here will be added into the Main Routing Table
as routes for destination address information. The default metric value
is 100.)
High Availability: Private IP Address selection.
A LAN interface configuration
8.1 Address Book)
Ethernet:
D-Link Firewalls User's Guide
55