D-Link DFL-1600 User Manual page 105

10.5. Dynamic Routing Implementation
Example:
routing table
It is assumed that a previously configured OSPF process named
"ospf-proc1" has been created.
In this scenario, all received routes from "ospf-proc1" will be added into the
main routing table, as this is not done automatically in the D-Link firewall.
WebUI
:
1. Dynamic Routing Rule:
Routing Dynamic Routing Policy
Routing Rule:
General
Name: e.g. "importOSPFRoutes".
Check From OSPF Process:
Select "ospf-proc1" from Available list and put it into Selected list.
Destination Network
...Or is within: all-nets
Then click OK.
2. Routing Action:
In the "importOSPFRoutes" configuration page:
Routing Action
General
Destination:
Select the main routing table from Available list and put it into Selected
list.
Then click OK.
The result of this configuration is that all learned routing information will
be added to the main routing table as long as they don't override any static
Importing routes from an OSPF AS into the main
Add
D-Link Firewalls User's Guide
Add
Add Route:
85
Dynamic