Layout Sheet - Canon imagePROGRAF W8400 User Manual

Printer Driver

Layout Sheet

The Layout sheet provides the following settings.
This feature allows you to print multiple
pages onto a single sheet or enlarge a
Page Layout
single page and print it over several
sheets (poster printing).
Overlays a watermark on the printed
image. You can freely configure the text,
Watermark border, angle, position and transparency
settings of a watermark and register the
watermark under an arbitrary name.
When the image to be printed is smaller
Print Centered than the sheet, you can print the image
centered so the margins are even.
Rotate 180 degrees This feature rotates the image 180 degrees.
No Spaces at When the image to be printed is smaller than
Top or Bottom the media, you can set the printer it does not
(Conserve feed and there is no margin at the top or
Paper) bottom. This conserves roll paper.
Copies Specifies the number of copies to print.
Special If the print results are not what you expect, you
Settings... can change how the print job is processed.
1- 37
Maintenance Sheet
The Maintenance sheet provides the following settings.
Open the Status Monitor and display the
Utility sheet. This is used to print the
nozzle check pattern, perform printhead
Utility cleaning, adjust the printhead position,
and adjust the feed amount.
For status prints, refer to the
Information tab in the status monitor.
Sets the type of black ink. Click the Ink
Update Ink Information button to automatically set
Information this setting to the black ink currently
loaded in the printer.
TOP
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index