Canon imagePROGRAF W8400 User Manual page 25

Function Menus
Menu Item
Skew Check Lv.
Width Detection
Return Defaults
ChangeBkInkType
Rep. Ink Tank
Adjust Printer
Auto Head Adj.
Advanced Adj.
1- 22
Setting Values
Standard*, Loose, Off
ON*, OFF, Media Size?
No, Yes
No, Yes
No, Yes
No, Yes
Function
If are printing on Japanese washi paper or
other media of non-standard width, you can
relax the skew detection threshold or switch the
detection function off.
Important
If media is loaded crooked when this setting is
Off, this could cause jams or foul the platen.
The Width Detection function can be switched
to Off only when printing on cut
sheets. You can switch width detection off for
Japanese washi or other media of non-
standard widths. If you switch this function Off,
then Media Size? is displayed and you can
enter the width of the media.
This function restores the media type settings
to their default values.
If you want to change the type of black ink, use
this setting to make the printer perform the
necessary processing so that you can change
the black ink tank.
If you need to change an ink tank during a print
job, use this setting to make the printer perform
the necessary processing so that you can
change the ink tank. This menu is displayed
during printing only.
Adjusts the printhead. (→ P.4-41)
Prints the pattern used to adjust nozzle gaps,
print direction, and color gaps; the printer reads
the printed pattern and performs automatic
adjustment based on the results of the printout.
TOP
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index