Canon imagePROGRAF W8400 User Manual page 24

Function Menus
Menu Item
Far End RollMrgn
Media Thickness
VacuumStrngth
Standard Cutter
Cut speed
CutDustReduct.
Correct Smear
1- 21
Setting Values
10 mm, 5 mm
Thick, Standard, Thin
Weak, Standard, Strong, Strongest
Enable, Disable
Standard, Fast
Off*, On
Off*, On
Function
Sets the margin to reserve at the trailing edge
of roll media to ensure printing quality is
maintained at the trailing edge.
Important
If set to 5 mm, the print quality at the trailing
edge, or the accuracy of feeding, may
deteriorate, or the surface of the print may be
scratched. Ink may also adhere to the trailing
edge of the media.
Selects the ideal thickness for the media type.
The printhead alert will display based on the
value of this setting.
Sets the amount of suction on the media on the
platen.
Determines whether the standard, flat blade
cutter is enabled.
Sets the speed of the cutter cutting the media.
For media such as film that has a tendency to
produce debris, select Fast to reduce the
amount of debris produced. This item is
enabled for the standard cutter only.
A line is printed at the cut line in order to reduce
the amount of dust generated by film and other
media during cutting.
Use this setting to correct the printing problems
if the media appears to smear easily.
TOP
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index