Canon imagePROGRAF W8400 User Manual page 290

Adjusting the Amount of Media Feed
5
Press the [ ] or [
desired setting value then press the OK
button.
If you want to increase the gap between the bands,
enter a number from 1 to 3.
If you want to reduce the gap between the bands,
enter a number from -1 to -3.
Fine Tuning
=0
The selected setting is prefixed with a (=) mark to
denote the current value.
6
Press the Online button.
Data
Online
Bk
Message
The Online lamp lights and the printer is ready to
print.
Note
The paper feed adjustment value can be entered even
while printing is being performed. If the paper feed
adjustment value is changed while printing is being
performed, however, the print result may be
misaligned by approx. 3 cm immediately after the
change is made.
If there are conspicuous white lines in the printed
matter, adjust towards "+", and if there are
conspicuous black lines in the printed matter, adjust
towards "-".
4- 45
] button to select the
Information Power
Cleaning
(3 sec.)
Stop/Eject
(1 sec.) Online
Offline
Menu
TOP
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index