Configuring The Computer For Netware - Canon imagePROGRAF W8400 User Manual

NetWare Settings (Windows)

Configuring the Computer for NetWare

Perform these settings on each computer after you have
selected the NetWare print service and protocol.
Connecting to a NetWare Network
Install the NetWare client software on all computers that
will perform printing, and the log onto either the NetWare
server or the tree. Refer to the NetWare manual or the
OS manual for the connection methods.
Installing the Printer Driver
To perform printing, the printer driver must be installed.
Install the driver according to directions from your
network administrator.
When you install the printer driver, be sure to select
Network printer and select the print queue that you
created with the NetWare print service settings.
Setting the Printer Port
Select Settings and then Printers from the Start menu,
and then select the printer icon. Next, select Properties
from the File menu. Select the Advanced sheet or the
Ports sheet, and then set the print queue that created
the print destination port using the NetWare print service
settings. (→ P.5-37)
Note
This procedure is not required if you set the connection
destination of the printer during the installation of the
printer driver.
5- 44
TOP
トップ
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index