Canon imagePROGRAF W8400 User Manual page 331

NetWare Settings (Windows)
3
Set NetWare Frame Type to the frame type
you are using, set TCP/IP Frame Type to
ETHERNET II, enter the IP Address
assigned to the printer, the Subnet Mask and
Gateway Address, then click the Set button.
Note
The IP address needs to be configured here so that
you can configure the printer protocol settings using a
web browser (Remote UI).
4
Click the OK button when the confirmation
message is displayed.
5- 35
5
When you have finished configuring the
settings, select Exit from the Printer menu.
Configuring the Printer Using the Printer
Operation Panel
The NetWare network information can be configured
using the printer operation panel.
1
Press the Online button to display MAIN
MENU.
MAIN MENU
Head Cleaning
Cleaning
(3 sec.)
Stop/Eject
(1 sec.) Online
2
Press [ ] or [ ] to select Interface Setup
then press [ ].
MAIN MENU
Interface Setup
3
Press [ ] or [ ] to select NetWare, then
press [ ].
Interface Setup
↓
NetWare
TOP
トップ
Chapter 1
Basic Use
Chapter 2
Using Various Media
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Contents
Index