Hp-Gl/2 Printing Takes A Long Time - Canon imagePROGRAF iPF755 User Manual

HP-GL/2 jobs are printed 6 mm larger than specied
The page size of the HP-GL/2 print job, as created in
the source application, is incorrect.
HP-GL/2 jobs are printed at maximum size, even if a
standard size is specied
The page size of the HP-GL/2 print job, as created in
the source application, is incorrect.

HP-GL/2 printing takes a long time

Large print jobs with a lot of data take longer to print. Please wait a while until printing is nished.
A job was printed when Input Resolution in the
Control Panel menu was set to 600dpi.
The printer stops when printing a HP-GL/2 job (the
carriage stops moving)
The printer is analyzing the print job.
A job was printed when Input Resolution in the
Control Panel menu was set to 600dpi.
Cause
Cause
Cause
Cause
Corrective Action
In the Control Panel menu, set PageSizeProcess1
to On.
(→P.49)
Corrective Action
In the Control Panel menu, set PageSizeProcess2
or Conserve Paper to On.
The layout will be changed to the optimal layout.
(→P.49)
Corrective Action
In the Control Panel menu, set Input Resolution to
300dpi and print again.
(→P.49)
Corrective Action
Please wait a while until printing is nished.
In the Control Panel menu, set Input Resolution to
300dpi and print again.
(→P.49)
HP-GL/2 problems
Troubleshooting 745