Cutting Roll Paper After Printing (Mac Os X) - Canon imagePROGRAF iPF755 User Manual

Cutting Roll Paper After Printing (Mac OS X)

This topic describes how to cut roll paper automatically after printing (using the auto cut function), as well as
how to print a cut line for manual cutting.
Note
•
The auto cut function is activated on the printer by default and when the printer driver is installed.
Follow the steps below to reactivate the function if it is disabled, or to select the setting for printing a
cut line instead.
1.
B
This sets the
Note
•
The conguration method varies depending on the OS and application software you are using.
If Page Setup is displayed in the application menu, the settings are congured by opening the
Page Attributes dialog box from Page Setup.
If it is not displayed, the settings are congured in the upper part of the printer driver displayed when
you select Print from the application software menu.
2.
Select the printer in the
3.
Choose the original size in the
4.
If you congured the settings using the Page Attributes dialog box, click
dialog box, and then select Print from the application software menu.
C
Format for and Paper Size.
A
Printer list.
C
Paper Size list.
Other useful settings
F
OK to close the
Enhanced Printing Options 335