Format Dialog Box; Size Sheet - Canon imagePROGRAF iPF755 User Manual

Format Dialog Box

This dialog box appears when you select "Format" from the "Object" menu after you select an object.
"Size" Sheet
You can rotate, enlarge, or reduce an object.
Note
•
When the objects are not selected, you can not select "Format".
"Rotate"
When you place a checkmark here, you can select "Rotate Right" or "Rotate Left".
Setting
"Rotate Right"
"Rotate Left"
Note
•
When several objects are selected, you cannot select "Rotate".
"Enl./Red."
When you place a checkmark here, you can select "Scaling", "Fit Paper Size", or "Fit Photo Size".
Setting
"Scaling"
"Fit Paper Size"
"Fit Photo Size"
Note
•
You can input between 25 and 600.
•
You can change the numbers by clicking either "▲" button or "▼" button.
Rotates the object 90 degrees clockwise.
Rotates the object 90 degrees counterclockwise.
Allows you to input the value of the enlargement or reduction ratio of an
object.
Prints by enlarging or reducing each object to match the paper size. If you
are using roll paper, objects are enlarged or reduced so that the width of
each object matches the width of the roll paper.
Prints all of the objects at the specied photo size.
Details
Details
Windows Software 401
Free Layout