Specifying The Frame Type Using The Printer Control Panel - Canon imagePROGRAF iPF755 User Manual

Specifying the frame type using the printer Control Panel

1.
On the Tab Selection screen of the Control Panel, press ◄ or ► to select the Settings/Adj.
tab ( ).
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
2.
Press the OK button.
The Set./Adj. Menu is displayed.
3.
Press ▲ or ▼ to select Interface Setup, and then press the OK button.
4.
Press ▲ or ▼ to select NetWare, and then press the OK button.
5.
Press ▲ or ▼ to select NetWare, and then press the OK button.
6.
Press ▲ or ▼ to select On, and then press the OK button.
The display reverts to the NetWare menu.
7.
Press ▲ or ▼ to select Frame Type, and then press the OK button.
8.
Press ▲ or ▼ to select the frame type to use, and then press the OK button.
The display reverts to the NetWare menu.
9.
Press ▲ or ▼ to select Print Service, and then press the OK button.
10.
Press ▲ or ▼ to select the desired print service, and then press the OK button.
The display reverts to the NetWare menu.
11.
Press the Menu button.
If any of the settings is changed, a conrmation message is displayed. In this case, press
the OK button.
Important
•
Be sure to complete step 11. This will activate the values you have entered.
Note
•
If an error message is displayed, check the settings and correct any invalid values.
•
To cancel this process, press the Stop button.
Network Setting (Windows)
Network Setting 589