Line Thickness Is Not Uniform; Lines Are Misaligned - Canon imagePROGRAF iPF755 User Manual

Problems with the printing quality

Line thickness is not uniform

In the Special Settings dialog box of the Windows
printer driver, Fast Graphic Process is selected.
The type of paper specied in the printer driver does
not match the type loaded in the printer.

Lines are misaligned

The Printhead alignment is not adjusted.
The type of paper specied in the printer driver does
not match the type loaded in the printer.
Problems with the printing quality caused by the type
of paper
For paper-specic troubleshooting tips to improve the printing quality, refer to the Paper Reference Guide.
(→P.97)
740 Troubleshooting
Cause
Cause
Corrective Action
Access the printer driver Properties dialog box from
Print in the File menu of the source application, and
follow these steps to print.
1.
Clear the option Open Preview When Print Job
Starts on the Main sheet.
2.
Clear the option Page Layout on the Layout
sheet.
3.
Click the Special Settings button in the Layout
sheet to open the Special Settings dialog
box, and remove the check from Fast Graphic
Process.
Load paper of the same type as you have specied
in the printer driver.
(→P.108)
(→P.138)
Make sure the same type of paper is specied in the
printer driver as you have loaded in the printer.
1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and
try printing again.
Corrective Action
Adjust the Printhead alignment.
(→P.666)
(→P.668)
(→P.670)
Load paper of the same type as you have specied
in the printer driver.
(→P.108)
(→P.138)
Make sure the same type of paper is specied in the
printer driver as you have loaded in the printer.
1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and
try printing again.