Hp-Gl/2 Jobs Are Printed In Monochrome (Or Color); Printed Colors Of Lines Are Inaccurate During Hp-Gl/2 Printing; Hp-Gl/2 Jobs Are Printed 6 Mm Larger Than Specified; Hp-Gl/2 Jobs Are Printed At Maximum Size, Even If A Standard Size Is Specified - Canon iPF685 User Manual

HP-GL/2 jobs are printed in monochrome (or color)

HP-GL/2 jobs are printed in monochrome (or color)
HP-GL/2 jobs are printed in monochrome (or color)
Cause
The Color Mode setting in the
Control Panel menu is incorrect.

Printed colors of lines are inaccurate during HP-GL/2 printing

Printed colors of lines are inaccurate during HP-GL/2 printing
Cause
AdjustFaintLines is On in the Con-
trol Panel menu.

HP-GL/2 jobs are printed 6 mm larger than specified

HP-GL/2 jobs are printed 6 mm larger than specified
The page size of the HP-GL/2 print job, as created in the source application, is incor-
rect.

HP-GL/2 jobs are printed at maximum size, even if a standard size is specified

HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
The page size of the HP-GL/2 print job, as created in the
source application, is incorrect.

HP-GL/2 printing takes a long time

HP-GL/2 printing takes a long time
Large print jobs with a lot of data take longer to print.
A job was printed when Input Resolution in the Control
Panel menu was set to 600dpi.

The printer stops when printing a HP-GL/2 job (the carriage stops moving)

The printer stops when printing a HP-GL/2 job (the carriage stops moving)
The printer is analyzing the print job.
A job was printed when Input Resolution in the Control
Panel menu was set to 600dpi.
652
Downloaded from ManualsPrinter.com Manuals
Check the Color Mode setting in the Control Panel menu.
(See "Menu Settings.")
However, for optimal Printhead performance, the printer consumes trace amounts of color ink even
when Monochrome is selected as Color Mode.
Setting AdjustFaintLines to Off in the Control Panel menu may help produce the expected re-
sults. However, lines in some colors may appear broken.
Cause
Cause
Cause
Cause
Corrective Action
P.459
➔
Corrective Action
In the Control Panel menu, set Oversize to Off.
(See "Menu Settings.")
Set Detect img size to Command priority or Detected size in the Con-
trol Panel menu.
(See "Menu Settings.")
P.459
➔
Set Conserve Paper to On in the Control Panel menu.
(See "Menu Settings.")
P.459
➔
Please wait a while until printing is finished.
In the Control Panel menu, set Input Resolution to 300dpi and print
again.
(See "Menu Settings.")
P.459
➔
Please wait a while until printing is finished.
In the Control Panel menu, set Input Resolution to 300dpi and print again.
(See "Menu Settings.")
P.459
➔
Corrective Action
P.459
➔
Corrective Action
Corrective Action
Corrective Action
iPF685
User's Guide