Control Panel
Mode transition
•
Mode display
The printer mode is indicated as follows.
*1: The printer automatically enters Sleep mode when idle for a specic period (by default, ve
minutes), that is, if no print jobs are received or buttons are pressed while all covers are closed.
However, it does not enter Sleep mode while error messages are displayed.
*2: In Sleep mode, any button can be pressed except the Power button to recover from Sleep mode.
Sleep mode is also terminated if a print job is received or a command is issued from RemoteUI.
•
Error display
Mode transition during error display is as follows.
If multiple errors occur, tabs related to errors other than the error currently shown ash. Press the ◄
or ► button to access other tabs and check those errors. If multiple errors occur that are related to
the Job tab and Settings/Adj. tab, each error message is displayed for 4 seconds on each tab before
another message is shown.
28 Printer Parts