Pr�Nt�Ng From A Des�Red Start�Ng Po�Nt - Canon imagePROGRAF iPF755 User Manual

Printing From a Desired Starting Point
When printing inside boundaries or in other situations when you want to specify a particular position to start
printing from, set Width Detection to Off in the printer menu for the type of paper used.
Set Width Detection to Off
1.
On the Tab Selection screen of the Control Panel, press ◄ or ► to select the Paper tab (
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
2.
Press the OK button.
The Paper Menu is displayed.
3.
Press ▲ or ▼ to select Paper Details, and then press the OK button.
4.
Press ▲ or ▼ to select the type of paper, and then press the OK button.
5.
Press ▲ or ▼ to select Width Detection, and then press the OK button.
6.
Press ▲ or ▼ to select Off, and then press the OK button.
Handling sheets
).
Handling Paper 143