Other Maintenance; Preparing To Transfer The Printer; Remove Paper; Access The Move Printer Menu - Canon imagePROGRAF iPF755 User Manual

Other Maintenance

Preparing to Transfer the Printer

To protect the internal parts in transit, always follow these steps before transferring the printer to a new location.
Refer to the Setup Guide for details on packing the printer and installing it after transfer.
Important
•
Be sure to contact your Canon dealer before transferring the printer to a new location. Ink may leak and
damage the printer if you do not prepare the printer correctly and it is tipped or stood on end in transit.
Note
•
It is not possible to prepare the printer for transfer if the Display Screen requests you to replace the
Maintenance Cartridge or check the remaining capacity. Replace the Maintenance Cartridge before
transfer preparations. In this case, you will need one new Maintenance Cartridge. (→P.701)
•
Depending on the state of the printer, part replacement may be necessary when preparing to transfer
the printer (that is, when you execute the printer menu item to prepare for transfer).

Remove paper

1.
Remove the paper.
•
Rolls (→P.118)
•
Sheets (→P.146)

Access the Move Printer menu

1.
On the Tab Selection screen of the Control Panel, press ◄ or ► to select the Settings/Adj.
tab ( ).
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
2.
Press the OK button.
The Set./Adj. Menu is displayed.
3.
Press ▲ or ▼ to select Prep.MovePrinter, and then press the OK button.
Once preparations are nished, a message on the Display Screen requests you to open the
Ink Tank Cover.
Important
•
If consumables must be replaced, the message Consumables must be replaced. Call for service.
is shown on the Display Screen and preparation is not possible. If this message is displayed, press
the OK button and contact your Canon dealer for assistance.
Other Maintenance
Maintenance 713