The Edges Of The Paper Are Dirty - Canon imagePROGRAF iPF755 User Manual

The edges of the paper are dirty

The Platen has become dirty after borderless printing
or printing on small paper.
The type of paper as specied on the printer does not
match the type specied in the printer driver.
The paper is wrinkled or warped.
A cut line is printed because CutDustReduct. is On
in the Control Panel menu to reduce cutting dust.
The Printhead is set too low in the Control Panel
menu.
You are printing on heavyweight paper or paper that
curls or wrinkles easily after absorbing ink.
The Ejection Guide is soiled.
Cause
Problems with the printing quality
Corrective Action
Open the Top Cover and clean the Platen.
(→P.709)
Make sure the same type of paper is specied on the
printer as in the printer driver.
(→P.112)
Make sure the same paper type is specied in the
printer driver as on the printer.
1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and
try printing again.
Straighten out the wrinkles or curls and reload the
paper. Do not use paper that has been printed on
previously.
(→P.108)
(→P.138)
If this function is not needed, set CutDustReduct. to
Off in the Control Panel menu.
(→P.49)
In the Control Panel menu, set Head Height to
Automatic.
(→P.673)
When printing on Heavyweight Coated Paper or
other paper-based media, choose a VacuumStrngth
setting of Strong or Strongest in the Control Panel
menu. If the paper still rubs, set Head Height to
Highest in the Control Panel menu.
(→P.683)
(→P.673)
When printing on CAD Tracing Paper or other
lm-based media, choose a VacuumStrngth setting
of Standard, Strong, or Strongest in the Control
Panel menu. If the paper still rubs, set Head Height
to Highest in the Control Panel menu.
(→P.683)
(→P.673)
Clean the Ejection Guide.
(→P.708)
Troubleshooting 733