Outport Setup Window - Yamaha CL1 Owner's Manual

Outport Setup window

In the Outport Setup window you can assign the source channel for each output port and set the parameters.
1
The window includes the following items.
1
Outport select tabs
These tabs switch the output ports controlled in the window in groups of up to eight ports.
2
DELAY SCALE field
Here you can select the units for the delay time shown below the delay time knob (
selected for the outport select tabs (
• meter (343.59m/s)
The delay time is shown as a distance in meters, calculated as the speed of sound (343.59 m/s) at an air temperature
of 20°C (68°F) multiplied by the delay time (seconds.)
• feet (1127.26ft/s)
The delay time is shown as a distance in feet, calculated as the speed of sound (1127.26 feet/s) at an air temperature
of 20°C (68°F) multiplied by the delay time (seconds.)
• sample
The delay time is shown as a number of samples. If you change the sampling frequency at which the CL operates,
the number of samples will change accordingly.
• ms
The delay time is shown in units of milliseconds.
3
Output port
This indicates the type and number of the output port to which the channel is assigned.
4
Channel select
This area lets you select the channel that is assigned to the output port.
5
Channel name
Indicates the name of the channel that is assigned to the corresponding output port.
6
DELAY button
Switches the output port delay on/off.
7
Delay time
The millisecond delay time value is shown above the knob.
The delay time value in the units selected in the DELAY SCALE field (
▲ ▼
Click the
/ buttons to make detailed settings.
1
), the DELAY SCALE field will be hidden in the screen.
86
8
). If the RECORDER tab is
2
) is shown below the knob.
2
3
4
5
6
8 7
9
0
A
CL Editor Owner's Manual