Input Patch; Output Patch - Yamaha CL1 Owner's Manual

2

Input patch

Select the input port (s) that will be assigned to the rack, from the following choices.
NONE
INS MIX 1–24
INS MTRX1–8
INS ST L, INS ST R, INS M(C)
This is not shown if nothing is mounted in the rack.
GEQ rack is for only output channels. If you want to use GEQ modules to the input channels, you can
NOTE
mount them in the EFFECT rack ( ➥ p.58.)
3
Module graphic
This area shows a graphic of the GEQ module that is currently assigned to the rack, and the parameters of that module.
You cannot edit the parameters in this screen.
Double-click this to open the module editor for that rack unit.
By holding down the <Ctrl>(< >) key of your computer keyboard and double-clicking this, you can open multiple
rack module editors. For these additional editors, the rack select buttons are not linked with the RACK popup window
of the CL itself.
4
Input meter/Output meter
These indicate the level of the signals being input and output from the rack.
5

Output patch

Select the output port(s) that will be assigned to the rack, from the following choices.
NONE
INS MIX 1–24
INS MTRX1–8
INS ST L, INS ST R, INS M(C)
6
ON
This switches the GEQ module between active and bypassed states.
A GEQ module is active when the ON button is lit.
7
GEQ Link Indicator
If a GEQ LINK is active, the GEQ Link indicator will be displayed in the left side of the rack (➥ p.57.)
No assignment
MIX channel 1–24 insert out
MATRIX channel 1–8 insert out
Insert-out of STEREO channel L/R or the MONO channel
No assignment
MIX channel 1–24 insert in
MATRIX channel 1–8 insert in
Insert-in of STEREO channel L/R or the MONO channel
54 CL Editor Owner's Manual