Yamaha CL1 Owner's Manual page 4

❏ Creating a user key
To open the Create User Key dialogbox, choose [Create User Key] from the [File] menu.
This creates a user key (with ".CLU" file name extension) that can be read from a USB flash drive by the CL console to
automatically set user-specific parameters.
1
7
8
9
0
A
1
User Name
Specify the name of the user. You can enter up to eight single-byte alphanumeric characters. Lowercase characters will
automatically become uppercase on the CL console.
2
Comment
Enter a comment for each user. You can enter up to thirty-two single-byte alphanumeric characters.
3
Password
Enter a password that will be used when this user key is read by the CL console. You can enter up to eight single-byte
alphanumeric characters. Uppercase and lowercase are distinguished.
4
Re-Enter Password
Enter the password once again as a safeguard against mistaken entry.
5
POWER USER
Specify whether this user is a power user. Power users can use the CL console to create or edit a user authentication key
with a specified user level.
6
Administrator Password
Enter the Administrator password that was specified on the CL console. This is not required if no Administrator pass-
word has been specified on the CL console, but if this password is incorrect you will be asked to enter it when the user
key is read.
7
ACCESS PERMISSION
In this area, specify the parameters that this user will be allowed to operate.
3
4
E
2
F D C
4
5
6
B
CL Editor Owner's Manual