Yamaha CL1 Owner's Manual page 47

C
INTERNAL DATA
This area shows the CL's library contents. The items displayed are the same as in the FILE list (
As desired, you can copy single or multiple data items between the FILE list and the INTERNAL DATA list, and copy or
move them to a different location within a list.
To do this, use the following methods to select the data item(s) that you want to copy or move.
• To select a single data item
Click the line containing the desired data item.
• To select multiple consecutive data items
Click the first data item to select it; then hold down the <Shift> key and
click the last data item.
• To select multiple non-consecutive data items
Click the first data item; then hold down the <Ctrl>(< >) key and click
each of the remaining data items.
When you have selected the data item(s) that you want to move or copy, drag
them to the desired location in the other list (if you're copying between lists)
or in the same list (if you're copying/moving within the same list.)
• To copy data items (overwriting the destination)
Drag the copy-source data item(s) to the desired line in the other list or to
another line in the same list. At this time, a  symbol will appear at the
right of the data item number.
When you drop the data item in this state, a dialog box will appear, asking
you to confirm the Save operation. If you click the OK button, the copy-
source data item(s) will be overwritten onto the copy-destination data
items, and the copy-source data item(s) will remain unchanged. (If the
copy-source selection contains multiple data items, the data will be over-
written onto consecutive data items starting at that data item.)
• To move data items
Within the same list, you can move the selected data item(s) to another
location to rearrange the order of the data items in the list. To do this,
drag the selected data item(s) to a location between two other lines in the
same list. At this time, a
When you release the mouse button in this state, the selected data item(s)
will move to that location, and the data item numbers will also change
accordingly. (If the move-source selection contains multiple data items,
those data items will be inserted consecutively at the location you spec-
ify.)
You cannot copy the Initial Data of the GEQ library.
NOTE
D
STORE
Stores the current settings to the data item that is selected in the list.
E
RECALL
Recalls the data item that is selected in the list.
F
CLEAR
Clears the data item(s) selected in the list.
G
UNDO
Cancels the last-performed library recall, store, copy, or move operation.
symbol will appear between the lines.
47
6
).
CL Editor Owner's Manual