MATRIX window
In this window you can view and edit the parameters of MATRIX channels 1–8. The parameters shown in the window can
be selected from the [View] menu or the menu that appears when you right-click (<control> key + click) in the window.
You can access this window in the following ways.
• From the [Windows] menu, choose [Overview] and then choose "MATRIX"
• Use the bank select keys in the Master window to turn on the [MTRX] button
1
1
MIX/CH/ST IN (Send levels from the MIX/INPUT CH/ST IN to
the MATRIX bus)
This switches between indicating the sends from MIX channels 1–24, the sends from
INPUT CH 1–16/17–32/33–48/49-64 (CL3), 49-72 (CL5), and the sends from ST IN.
The bar graphs located immediately below the button indicate/adjust the level of the signal
that is sent from each channel to the MATRIX bus. The method of operation and the mean-
ing of the display are the same as for (
5
) MATRIX in the MIX window (➥ p.18.)
20
CL Editor Owner's Manual