Yamaha CL1 Owner's Manual page 61

1
4 5
4
EFFECT NAME
Indicates the title of the currently selected effect.
5
TYPE (EFFECT TYPE)
Indicates the currently selected effect type. You can also switch the effect type from this window. To do so, click the text
box, and select the desired effect type from the popup menu that appears.
6
LIBRARY
This button accesses the effect library. Clicking this button will open the EFFECT page of the Library window.
7
9
A
1
Rack No. (Rack selection)
2 3
Select the rack module of the EFFECT rack that you want to
control.
2
BYPASS
This button temporarily bypasses the effect.
3
CUE
This button cue-monitors the output of the currently selected
effect.
NOTE
6
7
Input patch
Click the L CHANNEL or R CHANNEL area, and choose one of the fol-
lowing as the signal route that will be patched to the L/R input channels of
the internal effect.
NONE
8
MIX 1–24
MATRIX1–8
ST L, ST R, MONO(C)
INS CH 1–72(*)
INS MIX 1–24
INS MTRX1–8
INS ST L, INS ST R, INS M(C)
0
(*) CL3: 1-64, CL1: 1-48
The channel name is shown in the boxes immediately below.
8
Input meter
Indicates the level of the signal being input to the internal effect.
9
Output patch
Click the L CHANNEL or R CHANNEL area, and choose one of the fol-
lowing as the signal route that will be patched to the L/R output channels
of the internal effect.
NONE
CH 1–72(*)
STIN1L–STIN8R
INS CH 1–72(*)
INS MIX 1–24
INS MTRX1–8
INS ST L, INS ST R, INS M(C)
(*) CL3: 1-64, CL1: 1-48
The channel name is shown in the boxes immediately below.
61
If the Channel Select/Sends On Fader checkbox
in the System Setup dialog box is not checked,
the [CUE] button will be hidden in the screen.
No assignment
MIX channel 1–24
MATRIX channel 1–8
STEREO channel L/R, MONO channel
INPUT CH 1–72(*) insert out
MIX channel 1–24 insert out
MATRIX channel 1–8 insert out
Insert-out of STEREO channel L/R or the
MONO channel
No assignment
INPUT CH 1–72(*)
ST IN channel 1–8 (L/R)
INPUT CH 1–72(*) insert in
MIX channel 1–24 insert in
MATRIX channel 1–8 insert in
Insert-in of STEREO channel L/R or the
MONO channel
CL Editor Owner's Manual