Dolby Pro Logic Ii X (Pro Logic Ii ) Mode - Denon AVR-2106 Operating Instructions Manual

Basic Operation
Dolby Pro Logic II x (Pro Logic
• To play in the PL II x mode, set "S. BackSp" at the "Speaker
Configuration" setting to "1sp" or "2sp".
II
• To play in the PL x mode, set "Surround Back" at the "Power
Amp Assign." setting.
1
STANDARD
Press the button to select the Dolby
II
Pro Logic x mode.
II
• The Dolby Pro Logic indicator lights.
Lights
The mode switches as shown below each time the
STANDARD button is pressed.
DOLBY PL II x DTS NEO:6
2
Play a program source.
For operating instructions, refer to the manuals of the
respective components.
3
SURROUND PARAMETER
Press the
select the surround parameter mode.
4
SELECT
Turn the knob, and press the
F F G G
or button to select the optimum mode for
the source.
When the "SB CH OUT" parameter is set to "ON". (Set "S.
BACK" at system setup to "SMALL" or "LARGE".)
Display
(Pro Logic
(Pro Logic
(Pro Logic
II ) mode
When the "SB CH OUT" parameter is set to "OFF". (Set
"S. BACK" at system setup to "NONE".)
Display
5
Press the
press the
various parameters.
Example: DOLBY PL
button to
See "Surround parameters q" for a description of the various
parameters.
6
Turn the
F F G G
or
parameters.
CURSOR
When the surround parameters are set using the buttons on
the main unit, stop operating the buttons after completing
the settings. The settings are automatically finalized and the
normal display reappears after several seconds.
7
Press the
parameter mode.
II
x Cinema mode)
II
x Music mode)
• When making parameter settings, the display will return to the
regular condition several seconds after the last button was
II x Game mode)
pressed and the setting will be completed.
II
(Pro Logic Cinema mode)
(Pro Logic II Music mode)
(Pro Logic II Game mode)
(Dolby Pro Logic mode)
SURROUND PARAMETER
button, and
CURSOR D D H H
or button to select the
II
x music mode screen
SELECT CURSOR
knob, and press the
button to set the various surround
ENTER
button to finish the surround
22
ENGLISH
2 Surround parameters q
Pro Logic II x and Pro Logic II Mode:
The Cinema mode is for use with stereo television shows and
all programs encoded in Dolby Surround.
The Music mode is recommended for stereo music and
surround-encoded stereo music sources.
The Pro Logic mode offers the same robust surround
processing as original Pro Logic in case the source content is
not of optimum quality.
The Game mode is for playing games. The game mode can only
be used with 2-channel audio sources.
Select one of the modes ("Cinema", "Music", "Pro Logic" or
"Game").
• Panorama Control:
This mode extends the front stereo image to include the
surround speakers for an exciting "wraparound" effect with
side wall imaging.
Select "OFF" or "ON".
• Dimension Control:
This control gradually adjusts the soundfield either towards
the front or towards the rear.
The control can be set in 7 steps from 0 to 6.
• Center Width Control:
This control adjusts the center image so it may be heard only
from the center speaker; only from the left/right speakers as
a phantom image; or from all three front speakers to varying
degrees.
The control can be set in 8 steps from 0 to 7.
ENGLISH
Basic Operation