Dolby Pro Logic Ii X (Pro Logic Ii ) Mode - Denon AVR-1506 Operating Instructions Manual

ENGLISH
Basic Operation
STANDARD
SURROUND PARAMETER
Dolby Pro Logic II x (Pro Logic
• To play in the PL II x mode, set "S. BackSp" at the "Speaker
Configuration" setting to "1sp" or "2sp".
• To play in the PL II x mode, set "Surround Back" at the "Power
Amp Assign." setting.
1
STANDARD
Press the button to select the Dolby
II
Pro Logic x mode.
II
• The Dolby Pro Logic indicator lights.
The mode switches as shown below each time the button
is pressed.
DOLBY PL II x
2
Play a program source.
For operating instructions, refer to the manuals of the
respective components.
3
SURROUND PARAMETER
Press the
select the surround parameter mode.
STANDARD
CURSOR F
SELECT
II ) mode
4
Turn the
F F
or
the source.
When the "SURROUND BACK" parameter is set to "ON".
(Set "S. Back" at system setup to "Small" or "Large".)
Lights
When the "SURROUND BACK" parameter is set to "OFF".
(Set "S. Back" at system setup to "None".)
DTS NEO:6
button to
SURROUND
ENTER
PARAMETER
CURSOR G
SELECT CURSOR
knob, and press the
G G
button to select the optimum mode for
(Pro Logic II x Cinema mode)
(Pro Logic II x Music mode)
II
(Pro Logic x Game mode)
II
(Pro Logic Cinema mode)
(Pro Logic II Music mode)
(Pro Logic II Game mode)
(Dolby Pro Logic mode)
21
ENGLISH
5
SURROUND PARAMETER
Press the
select the various parameters.
The mode switches as shown below each time the button
is pressed.
• When the Cinema mode:
MODE CINEMA CINEMA EQ TONE DEFEAT
DEFAULT SURROUND BACK
• When the Music mode:
MODE MUSIC TONE DEFEAT SURROUND BACK
DEFAULT CENTER WIDTH DIMENSION
• When the Game mode:
MODE GAME TONE DEFEAT
DEFAULT SURROUND BACK
• When the Dolby Pro Logic mode:
MODE DOLBY PL CINEMA EQ TONE DEFEAT
DEFAULT SURROUND BACK
If you do want the bass and treble to be adjusted, turn off
the tone defeat mode.
6
SELECT
Turn the knob, and press the
F F G G
or button to set the various surround
parameters.
When the surround parameters are set using the buttons on
the main unit, stop operating the buttons after completing
the settings. The settings are automatically finalized and the
normal display reappears after several seconds.
• Cinema EQ setting:
Basic Operation
button to
PANORAMA
CURSOR