Omron ZFX-C User Manual page 52

Note
Verification and Candidate level
A rough search is performed in-
side the search region to find the
candidate point.
+
+
Search Rotation Range
Models in the range set by Rotation range are created based on the registered model.
Example: When Rotation range is 15° and Skipping angle is 5°
Registered model
Setting the Candidate level
The candidate level can be set while checking which part is to be detected as the candidate point. The search takes
longer when there are many candidate points. Adjust the candidate level, if necessary.
Camera image
ZFX-C User's Manual
Verification ON
+
Verification OFF
+
Reference
-5°
-10°
-15°
Most similar model among these model is searched for.
5.
Pattern Search Candidate level
Camera 0 LIVE
60
Apply Cancel Capture
A detailed search is per-
formed at images near all
+
candidate points.
A detailed search is performed at im-
ages near the candidate point having
the highest correlation.
5°
10°
15°
SD
Search candidate
Crosshair cursors are displayed at
candidate level or higher locations.
Setting Measurement Items
49