Omron ZFX-C User Manual page 111

Setting Calibration by Sampling Input
With this method, calibration is set based on the measurement results. First, a pre-registered model is
measured to find its position (in sub-pixel units). When the actual coordinates of the position that was found is
input, the calibration data is automatically calculated.
Model
Setup method
Image adjustment
The image adjustment function can be set for calibration measurement.
MENU mode - [Setup] - [Cameras] - [Camera 0/1] - [Calibration] - [Sampling input] - [Img Adj]
Item
Color filter
Filtering
BGS level
Registering the model
Register the model to be used for calibration.
MENU mode - [Setup] - [Cameras] - [Camera 0/1] - [Calibration] - [Sampling input] - [Region]
Item
Region
Search region
108
Cameras/Lighting
When the scale in the X and Y directions is the same
When each of the scales in the X and Y directions are different
Description
For details, see "Image Adjustment". p.99
Description
Registers the model to be used for calibration.
Sets the region in which to search for the model.
Measure 2 locations and input the actual coordinates.
Measure 3 locations and input the actual coordinates.
ZFX-C User's Manual