Creating An Sfc Program; Creating A New Project; Creating (Inserting) A New Sfc Program - Omron WS02-CXPC1-V8 - V8.1 REV 02-2009 Operation Manual

Creating an SFC Program

3-1

Creating an SFC Program

3-1-1

Creating a New Project

1
2
3
3-1-2

Creating (Inserting) a New SFC Program

Use the following procedure to create an SFC program for a project.
1
2
Note: You can also create programs in either ladder or ST. Right-click the Programs item in the
Note: SFC programs can be set as the default program of a newly created project. Setup is
SFC chart editor has 3 types of SFC elements (Initial Step, Transition, and Step)
registered by default.
64
Start CX-Programmer and select New from the File menu.
From the Device Type list on the Change PLC dialog, select a PLC model, which
supports the SFC programming function; a list of which is provided below.
PLC Model
CJ2H Type: CJ2H-CPU68/67/66/65/64/68-EIP/67-EIP/66-EIP/65-EIP/64-EIP
CS1G-H Type: CS1G-CPU45H/44H/43H/42H
CS1H-H Type: CS1H-CPU67H/66H/65H/64H/63H
CJ1G-H Type: CJ1G-CPU45H/44H/43H/42H
CJ1H-H Type: CJ1H-CPU67H/66H/65H/67-R/66-R/65-R/64-R
CJ1M Type: CJ1M-CPU23/22/21/13/12/11
Press the Settings button to select a CPU type.
For details on other settings, refer to the CX-Programmer Operation Manual (Cat.
No. W446).
In the project workspace, right-click the Programs item, and select Insert Program
- SFC from the pop-up menu.
An SFC program is inserted into the project workspace, and the SFC editor is
displayed in the right of the workspace.
project workspace, and select Insert Program - Ladder or Insert Program - Structured
Text from the pop-up menu.
For details on ladder programs, refer to the CX-Programmer Operation Manual (Cat. No.
W446).
For details on ST programs, refer to the CX-Programmer Operation Manual – Function
Blocks and Structured Text (Cat. No. W447).
performed on the PLCs tab under Tools - Options.
For details, refer to 1-3-6 Environmental Settings Unique to the SFC CX-Programming
Functions.
Section 3-1
CPU Type