Application Selection; Application Selection; Setting 1: Water Supply Pump Application; Setting 2: Conveyor Application - Omron V1000 User Manual

4.6 Application Selection

4.6

Application Selection

Several Application Presets are available to facilitate drive setup for commonly used applications. Selecting one of these
Application Presets automatically sets the required parameters to the Application Preset default values and selects I/Os.
In addition, the parameters most likely to be changed are assigned to the list of User Parameters, A2-01 through A2-16.
These can be accessed in the Setup Mode and provide quicker application adjustment by eliminating the need to scroll
through multiple menus.
The following presets can be selected:
Note: The drive parameters should be initialized by setting A1-03 to "2220" or "3330" prior to selecting an Application Preset.
WARNING! Confirm the drive I/O signals and external sequence before performing a test run. Setting parameter A1-06 may change
the I/O terminal function automatically from the default setting. Failure to comply may result in death or serious injury.
No.
A1-06
u

Setting 1: Water Supply Pump Application

No.
A1-02 Control Method Selection
b1-04 Reverse Operation Selection
C1-01 Acceleration Time 1
C1-02 Deceleration Time 1
C6-01 Duty Rating
E1-03 V/f Pattern Selection
E1-07 Mid Output Frequency
E1-08 Mid Output Frequency Voltage
L2-01 Momentary Power Loss Operation Selection
L3-04 Stall Prevention Selection during Deceleration
No.
b1-01 Frequency Reference Selection
b1-02 Run Command Selection
b1-04 Reverse Operation Selection
C1-01 Acceleration Time 1
C1-02 Deceleration Time 1
E1-03 V/f Pattern Selection
u

Setting 2: Conveyor Application

No.
A1-02 Control Method Selection
C1-01 Acceleration Time 1
C1-02 Deceleration Time 1
C6-01 Duty Rating
L3-04 Stall Prevention Selection during Deceleration
No.
A1-02 Control Method Selection
b1-01 Frequency Reference Selection
b1-02 Run Command Selection
82
Parameter Name
Application Presets
Table 4.5 Water Supply Pump Parameter Settings
Name
Table 4.6 Water Supply Pump: User Parameters (A2-01 to A2-16)
Parameter Name
Table 4.7 Conveyor: Parameter Settings
Parameter Name
Table 4.8 Conveyor: User Parameters (A2-01 to A2-16)
Parameter Name
Setting Range
0: Disabled
1: Water supply pump
2: Conveyor
3: Exhaust fan
4: HVAC
5: Compressor
6: Hoist
7: Traveling
Default Setting
0: V/f Control
1: Reverse Prohibited
1.0 s
1.0 s
1: Normal Duty
0FH
30.0 Hz
50.0 V
1: Enabled
1: Enabled
No. Parameter Name
E1-07 Mid Output Frequency
E1-08 Mid Output Frequency Voltage
E2-01 Motor Rated Current
Multi-Function Digital Input Terminal S5 Function
H1-05
Selection
Multi-Function Digital Input Terminal S6 Function
H1-06
Selection
L5-01 Number of Auto Restart Attempts
Default Setting
0: V/f Control
3.0 s
3.0 s
0: Heavy Duty
1: Enabled
No. Parameter Name
C1-02 Deceleration Time 1
E2-01 Motor Rated Current
L3-04 Stall Prevention Selection during Deceleration
SIEP C710606 20 OYMC AC Drive - V1000 User Manual
Default
0