Character String Memory Table Clear Command (Sent From Host To Pt) - Omron NT21 Reference Manual

Programmable terminals
Hide thumbs Also See for NT21:
Table of Contents

Advertisement

Commands/Responses
Reference: The maximum number that can be specified for numeral memory table entries
Response
Format
Function
4-3-13 Character String Memory Table Clear Command
Command
Format
Reference: The maximum number that can be specified for character string memory table
e
to e
:
Final cleared numeral memory table entry number (4 BCD dig-
1
4
its)
0000 to 1999
s
, s
:
Checksum (2 hexadecimal digits)
1
2
If m is 0, omit this setting.
depends on the setting for numbers of numeral memory table entries
(512/1000/2000) made at the Support Tool.
Only if Yes is set for the Response memory switch, the response indicated below
is returned on normal completion.
[ESC]
C
1B
43
s
, s
:
Checksum (2 hexadecimal digits)
1
2
This is always added (fixed as 0).
Writes 0 to all the numeral memory table entries within the specified range.
If settings are omitted for both the first cleared numeral memory table entry
number and the final cleared numeral memory table entry number, all the nu-
meral memory table entries are cleared. It is not possible to omit just one of
these settings.
When writing is executed to numeral memory table entries from No.247 to
No.253 (areas for clock data display/reading use only), operation will be fin-
ished normally without writing values.
[ESC]
C
1B
43
(e1)
* *
m:
Checksum present/absent (1 BCD digit)
0: Absent
1: Present
b
to b
:
First cleared character string memory table entry number
1
4
(4 BCD digits)
0000 to 0499
e
to e
:
Final cleared character string memory table entry number
1
4
(4 BCD digits)
0000 to 0499
s
, s
:
Checksum (2 hexadecimal digits)
1
2
When m is 0, omit this setting.
entries depends on the setting for numbers of character string table entries
(256/1000/2000) made at the Support Tool. However, it is not possible to clear
character string memory table entries higher than entry 500.
N
0
0
s1
4E
30
30
30
(Sent from Host to PT)
S
m
(b1)
(b2)
53
* *
* *
* *
(e2)
(e3)
(e4)
(s1)
* *
* *
* *
* *
Section
4-3
s2
[CR]
43
0D
(b3)
(b4)
* *
* *
(s2)
[CR]
0D
* *
387

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nt631Nt31 seriesNt21 seriesNt631 series

Table of Contents