Size And Display Position Of A Window; Changing The Displaying Order Of Windows - Omron NT21 Reference Manual

Window Function

2-15-5 Size and Display Position of a Window

2-15-6 Changing the Displaying Order of Windows

Size of a window can be specified freely by 20 dot unit when creating a window
screen. (Minimum window size: 20x20) It is possible to display a window at a
different position from where it was created, or to move a window. (Distance of
movement has to be multiple of 20 also.)
Example:
When multiple windows are displayed on a base screen, the part of the windows
may overlap with each other. To move a window that is covered by the other win-
dow to the front, follow the methods below.
Changing the displaying order by opening or moving operation of the window
The window that was opened or moved last comes to the front.
Changing the displaying order by closing operation of the window
When the window at the front is closed, the window displayed next comes to
the front.
Close the window at the front
Changing the displaying order by touch panel operation at the PT
When the window is touched, while it is being displayed, the touched window
comes to the front automatically. However, if a touch switch is registered at the
touched position, the touch switch function will be performed and the display-
ing order of windows is not changed.
Original position Destination Position
Move
Multiple of 20
Multiple of 20
Pop-up window/keyboard
Window opens
touch switch
Open
Window already opened
The window displayed next comes to the front
Section 2-15
241