Omron NT21 Reference Manual page 338

Changing Numeral and Character String Display
Example of Use
4. After the execution of memory table copying, return the setting for bit 3 of the
4th word (word n + 3) from the beginning of the PT status control area to 0
(OFF).
Setting at the Support Tool
Set the word and the contents with the Support Tool as indicated below.
Allocated word in the PT status control area:
00100 (word 100 in the CIO area)
Contents to be registered for the screen:
Character string memory table entry 4
LINE 1
Contents of setting in character string memory table entries
No. Contents
4 NORMAL
10 FAULT
11 NORMAL
NORMAL
Character string memory table entry 4
Number of digits
4 digits
4 digits
4 digits
Section 3-5
323