Omron NT21 Reference Manual page 176

Graphs
160
General
Meter Color
Foreground Foreground color for the present value (needle or fill) of the
meter part (Colors other than black and white are available
with the NT31C and NT631C only.)
Black/Blue/Red Magenta/Green/Cyan/Yellow/White
Background Background color of the analog meter (Colors other than black
and white are available with the NT31C and NT631C only.)
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White
+Range Display color for the positive range (Colors other than black
and white are available with the NT31C and NT631C only.)
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White
–Range Display color for the negative range (Colors other than black
and white are available with the NT31C and NT631C only.)
(effective only when a check mark is set for Display Sign)
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White
Settings
Value
Table Entry Number of numeral memory table entry whose contents are to
be displayed.
Display % Presence/absence of a percentage indication of the contents
of the numeral memory table entry (Method for calculating the
percentage value, page 162)
Check mark (percentage displayed)/
No check mark (no percentage displayed)
For details on the Display % properties, refer to the Numeral
Display's General Properties on page 141.
100% *1 (Specify 100% value using either of Table Entry or Value.)
Table Entry Numeral memory table entry number check to find the 100%
value for percentage calculation
Designate the number of the numeral memory table entry that
stores the 100% value.
Range: 0 to 1999
Value Check to find the 100% value for percentage calculation
Designate the 100% value (default: 100)
Range: –2147483648 to 2147483647
0% *1 (Specify 0% value using either of Table Entry or Value.)
Table Entry Numeral memory table entry number check to find the 0%
value for percentage calculation
Designate the number of the numeral memory table entry that
stores the 0% value.
Range: 0 to 1999
Value Check to find the 0% value for percentage calculation
Designate the 0% value (default: 0)
Range: –2147483648 to 2147483647
–100% *1 (Specify –100% value using either of Table Entry or Value.)
Table Entry Numeral memory table entry number check to find the –100%
value for percentage calculation
Designate the number of the numeral memory table entry that
stores the –100% value.
Range: 0 to 1999
Value Check to find the –100% value for percentage calculation
Designate the –100% value (default: –100)
Range: –2147483648 to 2147483647
*1: The –100% value, 0% value, and 100% value must comply with the following
relationship:
–100% value < 0% value < 100% value
When a table entry is specified for the % value, the relationship above will not be
Section 2-10