Initializing The Memory Switches - Omron NT21 - SETUP MANUAL 10-2001 Setup Manual

Memory Initialization

6-4-5 Initializing the Memory Switches

116
Initialization returns all the memory switches of the NT21 to their status on ship-
ment.
Initialize the memory switches by following the menu operations from the Main-
tenance Mode Menu as shown below.
If No is selected, the NT21 returns to the MEMORY INIT. MENU screen without
initializing the memory switches.
On completion of memory switch initialization, the message Finished is dis-
played and the NT21 returns to the MEMORY INIT. MENU screen.
Select Memory Init..
Select Memory Switch.
Select Yes.
The memory tables are initialized. During ini-
tialization, the message Initializing is dis-
played.
Section 6-4