Operations In The System Installer Mode; Calling The System Installer Mode - Omron NT21 - SETUP MANUAL 10-2001 Setup Manual

Operations in the System Installer Mode

6-5

Operations in the System Installer Mode

6-5-1 Calling the System Installer Mode

118
Initialize the recipe tables by following the menu operations from the Mainte-
nance Mode Menu as shown below.
Select Memory Init..
Select Recipe Table.
Select Yes.
The recipe tables are initialized. During ini-
tialization, the message Initializing is dis-
played.
If No is selected, the NT21 returns to the MEMORY INIT. MENU screen without
initializing the recipe tables.
On completion of memory table initialization, the message Finished is displayed
and the NT21 returns to the MEMORY INIT. MENU screen.
The following functions can be executed in the System Installer mode:
• Clearing/installing the system program (page 119)
• Disabling/enabling display of the System Menu (changing the system settings)
(page 120)
• Disabling/enabling writing to the screen data memory (changing the system
settings) (page 120)
• Clearing screen data (page 121)
If the NT21 has no system program installed, or if the system program is cor-
rupted, the System Installer mode is automatically established when the power
is switched ON.
Section 6-5