Omron NT21 - SETUP MANUAL 10-2001 Setup Manual page 200

Specifications
Programming Environment
Item
Programming System Programming Support Software
Programming Device Programming Support Software: NT-series Support Tool for Windows (Ver. 5), by OMRON
Special Features
Item
Buzzer
Touch switch input sound
Maintenance function
Battery backup (optional)
Resume function
(Operates only when the
optional battery is installed.)
Calendar and clock function
Programming Console function
Mathematical function
System program
transmission
Transmission
Screen data
functions
transmission
History data
uploading
Three kinds of buzzer sound (continuous, short intermittent, and long intermittent)
Sounds: On reception of a command from the host, display of a screen with a
buzzer setting, or display of an error screen such as for a receive error.
Stops: On reception of a command from the host, or display of a screen with
no buzzer setting.
Setting: Set "ON" for "Buzzer Sound" in the memory switch menu, or set
"ERROR ON" for the buzzer to sound only when an error occurs.
The buzzer sounds three times in response to prohibited input.
Touch switches
Input sound: Sounding for 0.2 seconds
Setting: Set "ON" for "Key Press Sound" in the memory switch menu.
- Memory switch setting
- Self-test functions, such as for the memory and external interface
- Setting condition confirmation function
- Communication check function
- Initialization of internal memory data
- Display of display/alarm history data
- Registered data test display function
- Backup of numeral/character string memory table data in the NT21
- Backup of display/alarm history data
- Backup of recipe data
Battery life:
When voltage becomes low: RUN Indicator lights in orange or red
Retains the contents of the numeral and character string memory tables (i.e., they
are not initialized) when the NT21 is turned ON or the operation mode is changed.
Setting: Set "ON" for "Resume Function" in the memory switch menu.
- Displays the date and time read from the PC.
- Display the date and time with the "Calendar Check" operation.
Executes functions equivalent to those of a C200H-PRO27-E Programming Console
for CPM1, CPM1A, CPM2A, CPM2C, CQM1 (-EV1 only), CQM1H,
C200HX/HG/HE(-Z)E, and SRM1 (C02-V2 only) PCs.
Executes functions as a Programming Console for CS/CJ-series PC.
Up to 256 calculation expressions can be registered along with the screen data. The
calculation function reads the required data from the numeral memory table or host
words, executes the registered calculations, and writes the results.
Arithmetic operators, logic operators, bit operators, and comparative operators can
be used.
Downloads the system program from the system installer.
Downloads/Upload the system program with a Memory Unit.
- Function for downloading screen data to and uploading screen data from the
NT Support Tool
- Function for transmitting screen data to and from the Memory Unit.
Function for uploading display/alarm history data from PT.
Specification
Specifications
5 years (at 25_C)
The communication flag to the PC (BAT LOW) is
turned ON (1).
Appendix A
189