Initializing The Memory Switches - Omron NT31 Setup Manual

Memory Initialization

6-4-6 Initializing the Memory Switches

Initialization returns all the memory switches of the NT31/NT31C to their status
on shipment.
Initialize the memory switches by following the menu operation from the System
Menu shown below.
Ver 3.10
If No is selected, the NT31/NT31C returns to the MEMORY INIT. MENU screen
without initializing the memory switches.
On completion of memory switch initialization, the message Finished is dis-
played and the NT31/NT31C returns to the MEMORY INIT. MENU screen.
Select Maintenance Mode.
Select Memory Init..
Select Memory Switch.
Select Yes.
The memory tables are initialized. During ini-
tialization, the message Initializing is dis-
played.
Section 6-4
147