Programming Console Function - Omron NT21 - SETUP MANUAL 10-2001 Setup Manual

Programming Console Function

6-12 Programming Console Function

Check Method
Check communication with the serial ports by following the menu operation from
the System Menu shown below.
After confirming the result of the check, press Quit. The NT21 returns to the I/F
CHECK MENU screen.
The NT21 has been equipped with a Programming Console function, which al-
lows it to be used like a C200H-PRO27-E Programming Console for CPM1,
CPM2A, CPM2C, CQM1, CQM1H, C200HX/HG/HE (-Z)E, CS-series CS1G/
CS1H, CS1G-H/CS1H-H, CJ-series CJ1G, or SRM1 PCs.
Except for recording (saving) ladder programs on cassette tape and replaying
(reading) them, almost all the functions of a Programming Console can be
executed.
Select Maintenance Mode.
Select I/O Check.
Select I/F Check.
Select Comm. Port A or Comm. Port B.
The check screen is displayed (Check
screen, page 163).
Section 6-12
165