Omron NT21 - SETUP MANUAL 10-2001 Setup Manual page 141

Setting Conditions for Communications with Host by Using Memory Switches
130
The baud rate determines whether the 1:N NT Link is standard or high-speed.
Standard: Standard 1:N NT Link
High-speed: High-speed 1:N NT Link
Select Memory Switch.
Display the fourth memory switch screen by
pressing the [↓] (next screen) or [↑] (previous
screen) touch switch.
Press the touch switch corresponding to the
port at which the 1:N NT Link method (stan-
dard or high-speed) is to be set (Comm. A
Method or Comm. B Method) to display the
NT Link (1:N) setting option.
The communications method setting on the
right will change each time that the touch
switch is pressed. In this example, serial port
A is used.
Section 6-7