Memory Initialization
Clear the screen data by following the menu operations from the Maintenance
Mode Menu as shown below.
If No is selected, the NT21 returns to the MEMORY INIT. MENU screen without
clearing the screen data.
On completion of screen data clearance, the NT21 returns to the MEMORY INIT.
MENU screen.
After the screen data has been cleared, if an attempt is made to set the NT21 to
the RUN mode before screen data has been transmitted from the NT Support
Tool or Memory Unit, an error message will be displayed and the RUN mode will
not be established.
Select Memory Init..
Select Screen Data.
Select Yes.
The screen data is cleared. During clear-
ance, the message Erasing Now... is dis-
played.
Section
6-4
111