Double-Touch Interval (Ns15 Only); Analog Rgb Output (Ns15 Only) - Omron NS - SETUP Setup Manual

6-3 PT Settings

6-3-17 Double-touch Interval (NS15 Only)

With the NS15, one corner of the screen must be touched twice in a row to move to the Sys-
tem Menu. The interval between the touches is called the double-touch interval and it can be
set to between 500 and 1,500 ms. The default setting is 1,000 ms. The display will change to
the System Menu if any corner of the screen is pressed twice within this interval. If switching
to the System Menu is difficult, increase the interval.
Perform the following procedure from the PT Operation Tab Page of the System Menu.
1. Set the desired value for the double-touch interval in milliseconds. An input dialog box
will be displayed when the input field for the setting is touched.
2. Press the Write Button. The setting will be saved.

6-3-18 Analog RGB Output (NS15 only)

Set whether to use the analog RGB output. The default setting is Disable. Use the following
procedure from the PT Settings Tab Page of the System Menu to set the analog RGB output.
1. Set the analog RGB output to either Enable or Disable.
2. Press the Write Button to save the setting.
Precautions
for Correct Use
6-32
• Even when the analog RGB output is set to Use, the analog RGB output will
stop if a screen with an analog RGB video display object is displayed on the
PT.
• When using the analog RGB output, if a screen with an object that switches
display colors is displayed on the PT, the image on the screen may be dis-
torted.