Omron NS - SETUP Setup Manual page 316

Appendix 8 Standard Models
EtherNet/IP-connectable NS-series PTs and PLCs
PLC series
CS Series
CJ Series
RS-232C/RS-422A Converters
NT-AL001
NS-AL002
CJ1W-CIF11
Reference
Software Related to NS-series PTs
CX-Designer
Reference
A-56
Using the
built-in board
CJ2H-CPU
64/65/66/67/
68-EIP
Model
• When a CJ1W-CIF11 Conversion Adapter is used, the total transmission length is
50 m.
• If NT-001/NS-002 Link Adapters are used together with CJ1W-CIF11 Conversion
Adapters on the same transmission path, the total transmission length is also 50 m.
Name Model
NS-CXDC1-V@
• NEC PC98-series computers are not supported.
• Use the NEC PC98NX Series, however, in the same way as IBM PC/AT compatible
computers.
Using an EtherNet/IP Unit
CS1G-CPU42/43/44/45(-V1)
CS1G-CPU42H/43H/44H/45H
CS1H-CPU63/64/65/66/67(-V1)
CS1H-
CPU63H/64H/65H/66H/67H
CS1D-CPU65H/67H
CJ1H-CPU65H/66H/67H
CJ1H-CPU65H/66H/67H-R
CJ1G-CPU42H/43H/44H/45H
CJ1M-CPU11/12/13/21/22/23
Specifications
RS-232C: 9-pin connector
RS-422A: 8-pin terminal block
RS-232C: 9-pin connector
RS-422A: 8-pin terminal block
RS-232C: 9-pin connector
RS-422A: 5-pin terminal block
For Windows 2000, XP, Vista, or 7
The CX-Designer contains a transfer program and stan-
dard system program for NS-series PTs.
EtherNet/IP Unit re-
quired for connection
CS1W-EIP21
(100BASE-TX/10BASE-
T)
CJ1W-EIP21
(100BASE-TX/10BASE-
T)
Details